
Tektronix 1 Series Oscilloscope: $450 Scope With AI Control
Tektronix's 1 Series DPO starts at $450 with 12-bit resolution, up to 200 MHz, I2C/SPI/UART decoding and an AI connector for natural-language control.
Every serious maker eventually hits a bug a multimeter cannot find. That is usually when an oscilloscope enters the budget conversation, and Tektronix just made that conversation much easier. On November 10, the company introduced the 1 Series DPO, a compact digital phosphor oscilloscope that Electronic Design and CNX Software report starts at $450, a price point Tek has rarely touched.
- Price: from $450, with 16 variants across four bandwidths, two channel counts and optional signal generator
- Core specs: 50, 70, 100 or 200 MHz; 2 or 4 channels; 12-bit ADC; up to 1.25 GS/s; 10 Mpoints per channel
- Embedded tools: I2C, SPI and UART triggering and decoding, FFT, mask testing, a DVM and frequency counter
- AI angle: early access to the Tek Intelligence connector for natural-language instrument control
What Do You Get in the Tektronix 1 Series?
The headline is that the 1 Series inherits the TekScope interface from Tektronix's flagship 7 Series, shrunk onto a 7-inch 1024 x 600 capacitive touchscreen. You can drag and pinch waveforms directly, while physical knobs and buttons cover the controls you reach for most. CNX lists a waveform capture rate of roughly 125,000 waveforms per second, 23 automatic measurements, advanced waveform math and XY plots.
For embedded developers, serial protocol decoding is the killer feature. Decoded I2C, SPI and UART data appears alongside the captured signal, so finding a corrupted byte or a timing glitch on an ESP32 or Raspberry Pi Pico project becomes a visual task rather than a guessing game. The S models add a 14-bit, 25 MHz arbitrary function generator and Bode plot analysis, handy for checking filters, amplifiers and power supply loops. Ethernet with browser-based remote control, USB host and device ports, and a VESA mount round out a genuinely bench-friendly package.
How Does AI-Assisted Oscilloscope Control Work?
Tektronix is also opening early access to its Tek Intelligence connector. According to the company, an engineer describes what they want to accomplish in plain language to their AI agent, and the connector translates that intent into validated instrument commands for configuration, measurement and automation. For students, that could mean asking for a rise-time measurement instead of hunting through menus. For test engineers, it is a fast path to scripted, repeatable setups.
The validation step matters. Rather than letting a model send arbitrary commands, the connector is designed to map requests to known-good operations, a sensible guardrail for hardware that can be configured in thousands of ways.
Who Should Consider This Entry-Level Oscilloscope?
Tektronix pitches the 1 Series at everyone from university students taking their first measurements to experienced engineers who want a capable scope close at hand. For hobbyists comparing options, it sits between DIY instruments like the Picotronix Raspberry Pi Pico 2 oscilloscope and pricier lab gear, with the brand's software polish as the differentiator. The scope was demonstrated at electronica 2026 in Munich this week.
More approachable professional tools mean more people learning to see what their circuits actually do. Find more maker and embedded gear in our mini computer coverage.
Sources: Tektronix via GlobeNewswire (Macau Business) — November 10, 2026; CNX Software — November 13, 2026; Electronic Design — November 9, 2026.
More Mini Computers Stories

ESP32-P4 Desktop OS: Sylphide OS and BMDS Turn MCUs Into PCs
Two open-source desktop OS projects, Sylphide OS and BMDS, give the $25 Olimex ESP32-P4-PC windows, apps, SSH and even Doom at 1280x720 and 60 FPS.

Eight Used V100 GPUs: How a Lawyer Built a Private AI Server
A lawyer's private AI server runs DeepSeek V4.1 Flash on eight used V100 GPUs at up to 215 tokens per second, keeping case files off the cloud.

Home Assistant Connect AUX-2: $69 PoE Hub for Old Hi-Fi
Home Assistant Connect AUX-2 is a $69 ESP32-S3 hub with PoE, a 112 dB DAC, two RS-232 ports and a BLE proxy that makes older audio and AV gear smart.
