Skip to main content
The Quantum Dispatch
Back to Home
Cover illustration for Home Assistant Connect AUX-2: $69 PoE Hub for Old Hi-Fi

Home Assistant Connect AUX-2: $69 PoE Hub for Old Hi-Fi

Home Assistant Connect AUX-2 is a $69 ESP32-S3 hub with PoE, a 112 dB DAC, two RS-232 ports and a BLE proxy that makes older audio and AV gear smart.

Alex Circuit
Alex Circuit★Nov 17, 2026★4 min read

Plenty of good equipment ends up in a closet not because it stopped working, but because it never learned to talk to anything else. That is the problem Nabu Casa is targeting with the Home Assistant Connect AUX-2, a $68.90 smart home controller announced on November 11, 2026. It is built around an ESP32-S3 and packs audio streaming, RS-232 serial control, a Bluetooth LE proxy, USB expansion and Power over Ethernet into one small box, so older hi-fi systems, AV receivers, UPS units and solar inverters can join Home Assistant without cloud services.

  • Price: $68.90 at Seeed Studio, with distributors across North America, Europe, Australia and Africa
  • Core: Espressif ESP32-S3R8, dual-core LX7 up to 240 MHz, Wi-Fi 4 and Bluetooth 5 LE
  • Audio: Texas Instruments PCM5122 DAC with 112 dB SNR, combined 3.5 mm analog and optical S/PDIF output
  • Power and wiring: 10/100 Ethernet with 802.3af PoE, or 5V/2A over USB-C, at under 1W

Home Assistant Connect AUX-2 Specifications

CNX Software's spec rundown gives a clear picture of what is on the board. Networking runs through a W5500 Ethernet controller, which is what makes PoE placement possible: one cable delivers both data and power, so the box can sit next to the equipment it controls rather than next to the Home Assistant server. The rest of the I/O list:

  • Serial: two 3.5 mm RS-232 ports (±5V) with individual TX/RX switches
  • USB: a Type-A host port for the Connect ZWA-2 Z-Wave adapter or a supported USB-to-RS-485 adapter
  • Expansion: a Grove connector with GPIO and I2C for extra sensors
  • Bluetooth proxy: up to three active BLE connections, plus passive BLE sensors
  • Physical: 106 x 63 x 25 mm, 104 grams, rated 0 to 65°C for indoor use

How Does AUX-2 Multi-Room Audio Work?

Audio is the headline trick. The AUX-2 uses the Sendspin protocol with Music Assistant to play local files and supported streaming services, and multiple units can be grouped with compatible smart speakers for synchronized multi-room playback. With firmware 2026.11.1, output reaches 24-bit/48kHz stereo, and FLAC, MP3 and WAV are supported. The single 3.5 mm jack switches automatically between analog and optical depending on the cable you plug in. It is output only, and Bluetooth audio streaming is not supported, so think of it as a network streamer for a classic amplifier rather than a Bluetooth receiver.

What Can the RS-232 and Bluetooth Proxy Features Do?

This is where the AUX-2 earns the "multi-tool" label Nabu Casa gives it. RS-232 remains the control language of a lot of AV receivers, projectors, UPS units and inverters, and two independent ports mean one box can manage a couple of devices in the same rack. Home Assistant's product page also highlights Modbus-style control for equipment such as pool heaters.

The Bluetooth proxy extends Home Assistant's BLE reach into rooms where the server's own adapter cannot hear sensors, and the USB port lets you move a Connect ZWA-2 Z-Wave stick to a better spot in the house while powering it over PoE. Zigbee via the Connect ZBT-2 also works, though CNX notes it is experimental, ZHA-only, and requires Home Assistant 2026.11 or later.

Open Firmware and Repairability

The device runs ESPHome and talks to Home Assistant over an encrypted connection with OTA updates. The bootloader is unlocked for custom firmware, the firmware is open source on GitHub, and Nabu Casa plans to publish the PCB design and 3D-printable enclosure files. Power supplies, cables and wireless adapters are not included.

If you are still deciding what should run Home Assistant itself, our Home Assistant hardware guide compares the Green, Raspberry Pi 5 and mini PC routes, and the LocalDot Echo Dot board is another example of reviving old audio hardware. For more ESP32 and SBC news, see our mini computers coverage.

Sources: CNX Software — November 16, 2026; Home Assistant Connect AUX-2 product page — November 2026; Nabu Casa AUX-2 firmware on GitHub — November 2026.

More Mini Computers Stories