
ESP32 PWM Fan Controller: Quiet NAS Cooling for $28
A $28 open-source ESP32 board runs four PWM fans with RPM monitoring, temperature sensors and Home Assistant support. Here's how it cools a NAS or a rack.
Homelab owners know the trade-off: run fans hard and your NAS closet sounds like a jet bridge, run them soft and your drives cook. A new open-source board from CoolMaker Lab, spotted by CNX Software on November 13, tackles that with an ESP32 microcontroller, four independently controlled PWM fan channels and native Home Assistant support for about $28.
- Price: $28 on Tindie, plus shipping from China starting at $5
- Fans: four 4-pin PWM channels with 1 to 100% speed control, tachometer RPM monitoring and per-fan power switching for true zero-RPM mode
- Sensors: up to four DS18B20 temperature probes on a 1-wire bus, plus optional LD2402G 24GHz mmWave radar on the v2.0 board
- Software: ESPHome firmware, a built-in web UI, an HTTP REST API, Bluetooth proxy and OTA updates
What Does the ESP32 PWM Fan Controller Do?
At its core is an ESP32-WROOM-32 module with 4MB of flash, Wi-Fi and Bluetooth LE. Each of the four 4-pin headers gets its own PWM output and its own tachometer input, so you set speeds independently and read the real RPM rather than guessing. The clever bit is the TPS22810 load switch on every channel. Most cheap PWM controllers can only slow a fan down; this board cuts power completely, so a fan can stop dead when cooling is not needed.
Power comes in through a 12V barrel jack, with CNX recommending a 12V/2A or larger supply. A TPS5430 buck converter steps down to 5V and an AMS1117 regulator handles 3.3V. There is also a USB-C port with a CH340C serial bridge for flashing and debugging, plus a 4-pin expansion header exposing two GPIOs.
How Does It Work With Home Assistant?
The controller runs ESPHome, so it shows up in Home Assistant with fan on/off switches, speed sliders, RPM readouts and temperature sensors ready for automations. The default curve keeps fans off at 30°C or below and ramps to the maximum by 50°C, and you can change both limits. Importantly, that automatic temperature control runs locally on the ESP32, so cooling keeps working even if your Home Assistant server is down for maintenance.
The optional mmWave radar opens fun options too, like spinning up a rack's fans only when nobody is in the room, or keeping a home office NAS whisper-quiet while you are at the desk. If you are still picking the box that runs your smart home, our Home Assistant hardware guide compares the popular options.
Is the Fan Controller Fully Open Source?
Yes. The GitHub repository holds the PCB design files, Gerbers, bill of materials, enclosure STEP files, ESPHome configurations and precompiled firmware, with documentation in English and Chinese. That makes it a solid base if you want to build your own or adapt the design for a different enclosure.
CNX compares it with the ARCTIC Fan Controller, a $10 USB device with 10 PWM headers that relies on motherboard USB and SATA power. ARCTIC's option suits a single PC case, while the ESP32 board is the better pick for standalone racks, network cabinets and DIY enclosures that need wireless control. It joins a growing list of ESPHome-friendly boards like the HomeMaster MiniPLC DIN-rail controller. Find more maker and homelab hardware in our mini computers section.
Sources: CNX Software — November 13, 2026; CoolMaker Lab on GitHub — November 2026; Tindie product page — November 2026.
More Mini Computers Stories

ESP32-P4 Desktop OS: Sylphide OS and BMDS Turn MCUs Into PCs
Two open-source desktop OS projects, Sylphide OS and BMDS, give the $25 Olimex ESP32-P4-PC windows, apps, SSH and even Doom at 1280x720 and 60 FPS.

Tektronix 1 Series Oscilloscope: $450 Scope With AI Control
Tektronix's 1 Series DPO starts at $450 with 12-bit resolution, up to 200 MHz, I2C/SPI/UART decoding and an AI connector for natural-language control.

Eight Used V100 GPUs: How a Lawyer Built a Private AI Server
A lawyer's private AI server runs DeepSeek V4.1 Flash on eight used V100 GPUs at up to 215 tokens per second, keeping case files off the cloud.
