
AAEON PICO-PTH4: Panther Lake on a 100 x 72mm Pico-ITX SBC
AAEON PICO-PTH4 squeezes Panther Lake into a 100 x 72mm Pico-ITX SBC with up to 32GB LPDDR5X, PCIe 5.0 NVMe, dual 2.5GbE and 180 TOPS of AI performance.
Boards this small rarely get a laptop chip this new. AAEON's PICO-PTH4 measures just 100 x 72mm, and the company describes it as the world's first Pico-ITX single board computer powered by Intel Core Ultra Series 3 processors, better known as Panther Lake. The spec sheet is a strong one for embedded and edge AI builders who need serious compute in a very small footprint.
- Board size is 100 x 72mm, with four 25W Intel Core Ultra Series 3 processor options
- Memory reaches up to 32GB of onboard LPDDR5X-7467, and storage uses M.2 2280 with PCIe 5.0 x4
- Networking is dual Intel I226 2.5GbE, with up to 180 TOPS of combined AI performance
- AAEON lists Windows 11 and Ubuntu support, specifically Ubuntu 26.04 with Linux kernel 7.0
Which Panther Lake Chips Does the PICO-PTH4 Offer?
AAEON offers four processors, all rated at 25W:
- Core Ultra X7 358H: 16 cores (4P + 8E + 4 LP-E) up to 4.8GHz, Arc B390 graphics with 12 Xe-cores, and a 50 TOPS NPU
- Core Ultra 7 355: 8 cores up to 4.7GHz, Intel Graphics with 4 Xe-cores, and a 49 TOPS NPU
- Core Ultra 5 338H: 12 cores up to 4.7GHz, Arc B370 graphics with 10 Xe-cores, and a 47 TOPS NPU
- Core Ultra 5 325: 8 cores up to 4.5GHz, Intel Graphics with 4 Xe-cores, and a 47 TOPS NPU
The X7 358H is the obvious pick for local inference and vision work, since it pairs the largest Arc GPU in the lineup with the 50 TOPS NPU. The two 8-core parts look better suited to fixed industrial tasks where memory bandwidth and I/O matter more than GPU throughput.
Unlike some earlier boards such as the AAEON PICO-ADN2, this one drops SATA and relies on NVMe and PCIe expansion instead. That is a sensible trade on a board this size.
PICO-PTH4 Storage, Networking and I/O
Storage uses a single M.2 2280 M-Key socket at PCIe 5.0 x4, which is unusually quick for the form factor. An extra PCIe 3.0 x4 link runs through an FPC connector, and an M.2 2230 E-Key slot offers PCIe 4.0 x1 plus USB 2.0 for optional wireless modules.
The rest of the I/O points firmly at industrial deployment:
- One HDMI 2.1 output, up to 4K at 60Hz
- Two USB 3.2 Gen 2 ports, plus two USB 2.0 through an internal header
- Two configurable RS-232/422/485 serial ports and 4-bit GPIO
- TPM 2.0, watchdog timer, Wake-on-LAN and a four-pin smart fan header
How Much Power Does the PICO-PTH4 Draw?
Power comes through a 12V DC input, with a two-pin Phoenix connector as standard and a lockable DC jack as an alternative. AAEON specifies about 54.7W typical and 79.8W maximum for a configuration with the Core Ultra X7 358H and 32GB of memory. Those figures are high for a Pico-ITX board, so plan cooling with care in any sealed enclosure.
LinuxGizmos did not list a price. For buyers who want similar silicon in a finished system, the TUXEDO Nano Pro Gen15 is a useful comparison. Browse more boards in our mini PC and SBC coverage.
Sources: LinuxGizmos — November 4, 2026; AAEON — product page, accessed November 5, 2026.
More Mini Computers Stories

M5Stack Core Matrix: A $29.90 ESP32-C61 Board With 256 LEDs
M5Stack's Core Matrix pairs an ESP32-C61 with Wi-Fi 6, a 16x16 white LED matrix and a BMI270 IMU for $29.90, ready for Arduino and UIFlow2 projects.

What Is Wi-Fi HaLow? 802.11ah Range, Speed and Hardware
Wi-Fi HaLow (802.11ah) reaches about 1 km on sub-1 GHz spectrum at up to 43.3 Mbps. Learn how it works, how it compares to LoRa, and which boards to buy.

LattePanda Mu Ultra Benchmarks: Local LLMs on a $733 Kit
CNX Software's LattePanda Mu Ultra benchmarks show 13.59 tokens/s on a 3B Llama model, 411 FPS YOLO26n on the GPU, and what the $733 kit needs for cooling.
