Articles Tagged “Self Hosted”
9 articles found

LocalDot Turns an Echo Dot Into a Home Assistant Speaker
LocalDot swaps a 3rd-gen Echo Dot's mainboard for an open ESP32-S3 and ESP32-P4 board that runs local Home Assistant voice control, from $50 per board.

ESP32-C3 Ad Blocker: Pi-hole-Style DNS Filtering for $2
The open-source esp32-c3-adblock firmware turns a $2 ESP32-C3 board into a network-wide DNS ad blocker that handles up to 537,000 domains without PSRAM.

Self-Hosted LLM Security: Locking Down Your Server
A practical hardening guide for self-hosted LLM servers: why Ollama and vLLM ship without auth, and the seven layers that keep your endpoint private.

PICOTTY Turns Pi Picos Into a Networked Serial Console
PICOTTY pairs a Pi Zero 2 W hub with Ethernet-connected Pico nodes to give four headless machines a browser-based serial console for under $100.

Proxmox VE 9.2 Brings Official Arm64 Virtualization
Proxmox VE 9.2 adds official 64-bit Arm builds, with full support for NVIDIA Grace and Vera platforms and best-effort support for UEFI Armv8-A hardware.

ESP RainMaker Neo Open Sources the Full IoT Stack
Espressif released ESP RainMaker Neo under Apache 2.0, handing makers the cloud backend, firmware SDK, and phone app to self-host on their own AWS account.

Thingino Open Firmware Now Supports 166 IP Cameras
Thingino replaces the stock firmware on Ingenic-based IP cameras with open-source Linux, adding RTSP, MQTT, VPN and Home Assistant on 166 supported models.

ESP32 wM-Bus Gateway Links Meters to Home Assistant
IoTLabs' open-source ESP32 wM-Bus Gateway reads 868 MHz utility meters and feeds the data to Home Assistant via ESPHome — no cloud, about $50.

AweSun's $69 Cloud KVM Q1 Brings BIOS-Level Remote Access to Any PC
The $69 AweSun Cloud KVM Q1 is a pocket-sized KVM-over-IP that gives you BIOS-level remote access to a headless PC or home server from anywhere.
