
GUITION ESP32-S31 Kit: 7-Inch Touch Display and Ethernet
The GUITION JC1060F570C pairs an ESP32-S31 with a 7-inch 1024x600 touchscreen, Ethernet and Wi-Fi 6 for about $29, just as Arduino core 4.0.0 adds support.
The GUITION ESP32-S31 development kit, model JC1060F570C, is the largest display board yet built around Espressif's dual-core RISC-V chip. CNX Software detailed it on November 20: a 7-inch capacitive touchscreen, an RJ45 Ethernet port, Wi-Fi 6 and a stereo audio codec, currently selling for under $30. The timing is good, because Arduino support for the ESP32-S31 went stable one day earlier.
- Display: 7.0-inch IPS panel, 1024 x 600 resolution, capacitive touch.
- Processor: ESP32-S31 with a 320 MHz RISC-V core, 16MB PSRAM and 16MB flash.
- Connectivity: 2.4 GHz Wi-Fi 6, Bluetooth 5.4, an 802.15.4 radio for Zigbee, Thread and Matter, plus 10/100 Ethernet.
- Price: $28.71 with enclosure or $29.39 without on AliExpress during Black Friday, against a regular price of roughly $35 to $37.
What Is on the GUITION ESP32-S31 Board?
The kit is built on an ESP32-S31-WROOM-3 module. Alongside the high-performance RV32 core with FPU and SIMD extensions there is a low-power RISC-V core, 512 KB of SRAM and a microSD slot for storage.
Audio is better equipped than on most maker displays: an Everest ES8389 stereo codec, an NS4150 amplifier, two MEMS microphones and a speaker connector. Expansion comes through two UART headers, an I2C header and an RS485 connector, which makes the board a natural fit for wall-mounted control panels. There are two USB Type-C ports, a real-time clock with a coin cell holder and a lithium battery connector. The whole unit measures 181.8 x 113.7 mm and weighs 300 grams.
One detail worth knowing: the ESP32-S31 supports Gigabit Ethernet, but CNX Software reports that GUITION has implemented Fast Ethernet here, likely to keep costs down. For a dashboard or home automation panel, 100 Mbps is plenty.
How Does It Compare With Other ESP32-S31 Displays?
This is the third ESP32-S31 touchscreen kit in quick succession, and the first to use the chip's native Ethernet interface. The Waveshare and VIEWE ESP32-S31 display both use 4.3-inch panels, so GUITION offers far more screen area at a lower price. CNX notes the smaller boards counter with extras such as proper terminal blocks, and Waveshare's adds a wide DC input range.
If you do not need a screen at all, the Waveshare ESP32-S31-Zero remains the cheapest route into the platform.
Is the ESP32-S31 Ready for Arduino?
It is now. Arduino ESP32 core 4.0.0 was released on November 19, based on ESP-IDF v6.1.1, and CNX Software notes it is the first stable release to support the ESP32-S31. The GUITION kit works with the ESP32S31 Dev Module board option in the Arduino IDE.
GUITION also supplies a resource bundle with Arduino and ESP-IDF demo code, including an LVGL demo, a Wi-Fi scanner and MJPEG and MP3 players, plus schematics and flashing tools. CNX describes the documentation as somewhat incomplete, so expect to lean on the schematic. The factory firmware demonstrates a desktop-style interface with Bluetooth speaker mode and video playback at up to 24 frames per second.
For anyone building a smart home panel, a workshop HMI or a desk gadget, a 7-inch Wi-Fi 6 single board computer with wired networking at this price is an easy recommendation to try. More maker boards are in our mini computer coverage.
Sources: CNX Software — November 20, 2026; Arduino ESP32 core 4.0.0 on GitHub — November 19, 2026.
More Mini Computers Stories

Three Used V100 GPUs Run Qwen 3.6 35B at 100 Tokens a Second
A homelab builder hit 100.8 tokens per second on Qwen 3.6 35B with three used Nvidia V100 GPUs in a rig priced at about $1,042. Here is the parts list.

ANAVI I2C TPM 2.0: A $20 Security Chip for Any Raspberry Pi
The ANAVI I2C TPM 2.0 adds hardware key storage and disk encryption to any Raspberry Pi for $20, with a driver already in Raspberry Pi OS. How it works.

Flipper One Kickstarter: $399 Linux Multi-Tool Ships 2027
Flipper One is now on Kickstarter at $399, with an RK3576, 8GB RAM, Wi-Fi 6E and LoRa, 5G and SDR add-ons. First units are estimated for July 2027.
